The Meadowlands stop will be cancelled today due to a scheduling issue. Bennetto will arrive to the stop at 4:30-5:30 today. We apologize for the inconvenience.
Bookmobile Stops Cancelled / Delayed
Published:
Thursday, August 7, 2025 - 9:15am
Printing, Photocopying and Scanning Unavailable at Dundas Branch
Printing and photocopying are not working at Dundas Branch. We're working to get these working again as soon as possible.
1
Published:
Saturday, August 2, 2025 - 9:45am
Locke Branch - Filming Nearby
Filming will take place near the Locke Branch from August 4 to 8, which will impact traffic flow and parking. We apologize for the inconvenience.
- East and West Side of Locke Street South
- North and South Side of Herkimer Street
- North and South Side of Stanley Avenue
1
Published:
Thursday, July 31, 2025 - 11:30am
Terryberry Branch Elevator Out of Order
The parking lot elevator at Terryberry Branch is not working. Members will need to use the accessible ramp at the Mohawk entrance and the inner elevator. We're working to get it fixed quickly.
1
Published:
Saturday, May 31, 2025 - 1:00pm
Public Computers - Audio Volume
Please note that the audio volume levels on our public computers are having issues. The estimated time of disruption is unknown at this time. Thank you for your patience.
All Branches and Bookmobile Stops
Published:
Thursday, May 29, 2025 - 4:00pm
Mount Hope Branch Accessibile Ramp Not Available
The accessibility ramp at Mount Hope Branch is damaged. The handrail is not available. The ramp will not be available while being repaired. We aim to fix it quickly.
1
Published:
Friday, May 23, 2025 - 4:30pm
3D Printing Guidelines
Purpose
The Hamilton Public Library strives to offer community access to new and emerging technologies. These guidelines establishes the acceptable use of the Library’s 3D printing equipment by the public in collaboration with Library staff.
Information
1. The Library’s 3D printers are available to the public to make three-dimensional objects in filament using a design that is uploaded from a digital file.
2. The use of the 3D printers must conform to the Hamilton Public Library’s Technology and Internet Use Policy.
3. The Library’s 3D printers may be used only for lawful purposes. The public will not be permitted to use the Library’s 3D printers to create material that is:
- Prohibited by provincial or federal law.
- Unsafe, harmful, dangerous or poses an immediate threat to the well being of others.
- Obscene or otherwise inappropriate for the Library environment.
- In violation of another's intellectual property rights; for example, the printers may not be used to reproduce materials that is subject to copyright, patent or trademark protection.
4. Prints are limited to a total of 12 hours printing time per week. The Library reserves the right to refuse any 3D print request.
5. Printers are to be operated by Library staff only.
6. Prices for materials are listed on our Makerspace Price Guide.
7. In submitting digital files for printing, the member agrees to assume all responsibility for, and shall hold the Library harmless in, all matters related to patented, trademarked or copyrighted materials.
8. The Library is not responsible for the functionality or quality of content produced on the 3D printer.
9. Items printed from Library 3D printers that are not picked up within 14 days will become property of the Library.
10. Refunds are not permitted.
